Welcome
(973) 509-9456
  • Home
  • Products
    • FiberTech
    • 4EVERCRETE
    • IMPENECRETE
    • 4EVERSEAL
    • Epoxy & Urethane
    • Specialty Coatings
    • KLENZCRETE
    • Cleaner Degreaser
    • Green Cleaning Products
  • Project Portfolio
    • Asbestos Encasement Projects
    • Lead Encasement Projects
    • Flooring System Projects
    • 4EVERCRETE & Waterproofing Projects
    • Mold Projects
  • Roofing Applications
  • Specifications
  • Contact Us
Picture

Picture
The FiberTech System is ECI's flagship product line. Our environmentally-advanced specialty coatings are extremely low- or 0-VOC; can be applied with a sprayer, brush or rollers; and are engineered specifically for the encasement of hazardous materials, such as lead-based paint, asbestos and mold cleaned surfaces. The FiberTech System also has the capability to provide waterproofing, rust-inhibiting, and mold-resistant properties depending on what the job requires. Learn More
FiberTech System Technical Data
Picture
FiberTech F-50 Penetrating Stabilizer Primer is a water-based primer with more than ten times the adhesion of other encasement primers. It has been specially engineered to penetrate, stabilize and permanently lock down a substrate and serves as the primer of the FiberTech System.
F-50 PDS
F-50 SDS
Picture
FiberTech F-51 Sealer Coat is a water-based topcoat for the FiberTech System, it was designed to form a composite system when applied over the F-50 primer. It has excellent adhesion and waterproofing properties and can stand up against ponding water on roof substrates including bituminous surfaces.
F-51 PDS
F-51 SDS
Picture
FiberTech F-50MS Penetrating Stabilizer Rust-Inhibiting Multi-Surface Primer is a water-based primer, originally created to be applied to metal roofing and has now been used in many applications where corrosion is or may be of concern.
F-50MS PDS
F-50MS SDS
Picture
FiberTech F-51MR Mold-Resistant Sealer Coat is the mold-resistant version of the F-51 top coat. It has been specially formulated to inhibit the growth of mold and can be used in areas subjected to ponding water.

F-51MR PDS
F-51MR SDS
Picture
​FiberTech F-50MR Penetrating Stabilizer Mold-Resistant Primer is the mold-resistant version of the F-50 primer. It has been specially formulated to inhibit the growth of mold and should be used as the primer on mold-cleaned surfaces.

F-50MR PDS
F-50MR SDS
Picture
FiberTech F-60 Mold-Resistant High Gloss Sealer Coat is a water-based coating, specially designed to waterproof and protect masonry and brick. It is used as a high gloss finish coating and is applied over the FiberTech F-51 Sealer Coat to form a waterproof jacket on all metal, wood, masonry and brick surfaces. It has been specially formulated to inhibit the growth of mold and can be used in areas subjected to ponding water.
F-60 PDS
F-60 SDS
Picture
FiberTech F-45 Fiber-Trap is a water-based penetrating sealer for use on asbestos and asbestos type fibrous substrates. Fiber-Trap not only surrounds, but penetrates the individual fibers, binding them together and helps bind the asbestos to the substrate.
​

F-45 PDS
F-45 MSDS
Picture
FiberTech F-52 Insulating Ceramic Sealer Coat is a ceramic filled water-based coating, specially designed to waterproof and protect roof surfaces, masonry and brick on the exterior and all surfaces on the interior of buildings. F-52 acts as a thermal barrier, which can reduce a building's utility costs by as much as 15-20%. It is also highly mold and mildew resistant.
F-52 PDS
F-52 SDS
Picture
4EVERCRETE is a one-time permanent application specially engineered with a proprietary formula to waterproof and greatly reduce vapor transmission through concrete. The product is applied by airless sprayer at high pressure to allow the product to atomize so that the silicate chains can be broken apart to best penetrate the slab. These silicates have been altered on a molecular level (from pencil-shaped to spherical) to allow for maximum penetration and filling capability. As the product works its way down through the capillary system of the concrete, it fills all voids and forms a colloidal gel - purging all contaminants to the surface in the process. Contaminant levels can vary from project to project. Usually, after 24-48 hours the contaminants can be cleaned off of the surface and the slab is permanently sealed. In cases with high levels of contaminants or salts, the purging process can take 72 hours or longer to complete. Once the purging process has stopped and the surface is clean, any coatings or coverings can be applied. Please refer to our latest 4EVERCRETE/IMPENECRETE Specification for more detailed instructions. Learn More

​In the case where flooring applications (Epoxy, Seamless Floors, VCT, Carpet, etc.) will be made over the slab, we recommend using our IMPENECRETE product to seal the surface and virtually stop water vapor drive. IMEPENECRETE will also increase surface bond and adhesion of flooring systems to the slab. Learn More
Picture
4EVERCRETE is the premier sealing and curing product available for today’s (and tomorrow’s) concrete. While other sealers merely sit on the surface after application, 4EVERCRETE has been shown to penetrate up to 7 ¾ inches (200 mm). Once it gets down into the concrete, it forms a colloidal gel, which fills any voids in the concrete preventing water and other harmful agents from migrating through. This is how the product waterproofs and seals the concrete from the inside. Even though 4EVERCRETE makes concrete virtually impermeable, it still allows the concrete to breathe.
4EVERCRETE PDS
4EVERCRETE SDS
Picture
4EVERCRETE for Rebar is the premier sealing and curing product available for today's (and tomorrow's) concrete reinforced with rebar. 4EVERCRETE for Rebar is specially formulated to stop or virtually prevent the corrosion of imbedded steel within concrete. 



4EVERCRETE for Rebar PDS
4EVERCRETE for Rebar SDS
How 4EVERCRETE for Rebar Works
Picture
IMPENECRETE is specially formulated to readily penetrate, seal and protect the surface of concrete by providing a protective opaque flexible polymer film coating which durably and tenaciously adheres to the surface after drying. IMPENECRETE is used in conjunction with 4EVERCRETE to form a total waterproof and vapor-proof barrier. Learn More
Picture
IMPENECRETE chemically provides a flexible vapor-barrier coating on the surface and a water-vapor barrier in the subsurface of concrete.  The simultaneous action of these two barriers combined, quickly and easily lowers concrete's water vapor rate emissions.  When IMENECRETE is used in conjunction with 4EVERCRETE, the concrete slab is completely waterproof and vapor-proof. IMPENECRETE also renders the treated concrete surfaces stronger, more abrasive, acid and chemical resistant, and also provides added surface bond capability for any floor system to be applied over it.  Some other benefits that IMPENECRETE provides to concrete are internal humidity stability, preserved matrix integrity, improved thermal resistance, added density, increased strengths, lowered creep deformation potential, etc.
IMPENECRETE PDS
IMPENECRETE SDS
Picture
4EVERSEAL is a special formulation of minerals that penetrates, seals, hardens, and protects terrazzo, stone, brick, concrete, unglazed tile, and other mineral and masonry surfaces. Learn More
Picture
4EVERSEAL adds hardness and strength to cement, terrazzo, and other masonry and mineral surfaces (including mortar and grout joints). Literally petrifies the area directly below the surface where applied. Penetrates into pores and increases density and durability, keeping dirt and moisture on top of the surface so that they are easily wiped away. Yet it allows vapors to exit and masonry to continue normal “breathing” action. Clear, non-yellowing, entirely without odor, easy to apply without streaking, enhancing natural beauty of stone and terrazzo. Non-flammable and non-toxic. Unaffected by repeated freeze-thaw cycles. Protects against freeze-thaw contraction and expansion so that cracking of masonry is reduced.
4EVERSEAL PDS
4EVERSEAL SDS
Picture
Specialty epoxies and urethanes for virtually any application. Learn More
Picture
Mega-Flex is an elastomeric hybrid epoxy and waterproofing membrane. It is a clear, two component, low odor, 100% solids material specially engineered to stay flexible and soft, with good bridging capacity for horizontal movement of up to 1/8" without fracturing the Mega-Flex material.
Mega-Flex PDS
Mega-Flex Hardener SDS
Mega-Flex Resin SDS
Picture
Infinity Clear is a  3:1 epoxy coating system that balances working and cure time. Infinity Clear Epoxy is a clear two component thermosetting, low odor, 100% solids epoxy designed as a coating system for various conditions and substrates.
Infinity Clear PDS
Infinity Clear Hardener MSDS
Infinity Clear Resin MSDS
Picture
ECI-3000 is a 0-VOC high-performance hybrid polyurethane top coat. ECI-3000 is a clear two component thermosetting, low odor, 100% solids, UV-stable urethane. It has been designed to be used in areas that require maximum abrasion and wear resistance. 
ECI-3000 PDS
ECI-3000 Catalyst SDS
ECI-3000 Resin SDS
Picture
ECI manufactures specialty coatings for various applications. Learn More
Picture
ECI-HDB-70 High Dielectric Barrier Coating is a high tech, state of the art, waterborne one component coating for both interior and exterior surfaces. This coating was designed using the latest technology in polymer science and formulation techniques to exhibit excellent corrosion resistance, extremely high dielectric strength, excellent exterior durability, and superior adhesion to metal, wood, cement, concrete, and plastic surfaces. With no odor, easy application, excellent electrical insulating properties, low VOCs, and water cleanup, HDB-70 is both ecologically safe and ideal for heavy duty electrical environments. Two coats are recommended.

ECI-HDB-70 PDS
ECI-HDB-70 MSDS
Picture
ECI-151 Urethane Acrylic Sealant is specifically formulated to provide ultimate performance in adhesion and durability. It forms a durable, airtight seal for water and weather protection. ECI-151 adheres well to wood, masonry, metal, drywall, plaster, glass, concrete, masonite and ceramic tile. It is ideal for sealing around doors, siding, stucco, windows, molding, sinks, flashing, pipes, counters, hardboard, exterior insulation finishing systems, etc.
ECI-151 PDS
ECI-151 MSDS
Picture
KLENZCRETE is for cleaning and preserving extremely dirty masonry surfaces. We currently offer two different formulations: the Concrete & Stone Cleaner and the Unglazed Brick & Polished Stone Cleaner. Learn More
Picture
Picture
KLENZCRETE Concrete & Stone Cleaner is for cleaning and preserving extremely dirty limestone, sandstone, rough marble, and concrete.

KLENZCRETE CS PDS
KLENZCRETE CS SDS
KLENZCRETE Unglazed Brick & Polished Stone Cleaner is for cleaning and preserving very dirty polished stone, unglazed brick, flame fractured granite, flagstone, slate, glazed terra cotta, and unglazed ceramic tile.
KLENZCRETE UBPS PDS
KLENZCRETE UBPS SDS
Picture
Superb Cleaner Degreaser was designed with your toughest cleaning jobs in mind. Say goodbye to built up grime, oil and grease. Superb will bring your surfaces back to beautiful condition again. Learn More
Picture
Superb Cleaner Degreaser is an extremely effective cleaner degreaser for those tough cleaning jobs. It powers through built up grime, grease and oil, making surfaces clean and looking like new. Superb is designed with the environment in mind, so it is biodegradable and easily breaks down. Its concentrated formula also makes it cost effective and easy to use. Just dilute it and apply.
Superb PDS
Superb SDS
Picture
Picture
Benefect Botanical Products are 100% botanical disinfectants and cleaners perfect for mold remediation projects as well as other tough cleaning jobs. These products can be used in residential, commercial and medical facilities, and they are less toxic than vinegar. 
Vital Oxide is an EPA-registered hospital disinfectant cleaner, mold and mildew killer, and odor eliminator. With its ready-to-use formula designed to be gentle to users but tough on germs, Vital Oxide is non-irritating to skin, non-corrosive to most treated articles, NSF-certified (no rinse required) for food-contact surfaces, and listed as a category IV (lowest approved category) pesticide with the EPA. With every bottle of Vital Oxide comes the promise that we are actively working toward environmentally sound cleaning and disinfecting solutions.
Vital Oxide PDS
Vital Oxide EPA Approval
Vital Oxide SDS
Independent Testing Data
Copyright ©2020 Environmental Coatings & Construction, Inc. All Rights Reserved.
(973) 509-9456  |  info@eciproducts.com
About Us
Contact Us