4EVERCRETE is a one-time permanent application specially engineered with a proprietary formula to waterproof and greatly reduce vapor transmission through concrete. The product is applied by airless sprayer at high pressure to allow the product to atomize so that the silicate chains can be broken apart to best penetrate the slab. These silicates have been altered on a molecular level (from pencil-shaped to spherical) to allow for maximum penetration and filling capability. As the product works its way down through the capillary system of the concrete, it fills all voids and forms a colloidal gel - purging all contaminants to the surface in the process. Contaminant levels can vary from project to project. Usually, after 24-48 hours the contaminants can be cleaned off of the surface and the slab is permanently sealed. In cases with high levels of contaminants or salts, the purging process can take 72 hours or longer to complete. Once the purging process has stopped and the surface is clean, any coatings or coverings can be applied. Please refer to our latest 4EVERCRETE/IMPENECRETE Specification for more detailed instructions. Learn More
In the case where flooring applications (Epoxy, Seamless Floors, VCT, Carpet, etc.) will be made over the slab, we recommend using our IMPENECRETE product to seal the surface and virtually stop water vapor drive. IMEPENECRETE will also increase surface bond and adhesion of flooring systems to the slab. Learn More
In the case where flooring applications (Epoxy, Seamless Floors, VCT, Carpet, etc.) will be made over the slab, we recommend using our IMPENECRETE product to seal the surface and virtually stop water vapor drive. IMEPENECRETE will also increase surface bond and adhesion of flooring systems to the slab. Learn More
4EVERCRETE is the premier sealing and curing product available for today’s (and tomorrow’s) concrete. While other sealers merely sit on the surface after application, 4EVERCRETE has been shown to penetrate up to 7 ¾ inches (200 mm). Once it gets down into the concrete, it forms a colloidal gel, which fills any voids in the concrete preventing water and other harmful agents from migrating through. This is how the product waterproofs and seals the concrete from the inside. Even though 4EVERCRETE makes concrete virtually impermeable, it still allows the concrete to breathe.
|
4EVERCRETE for Rebar is the premier sealing and curing product available for today's (and tomorrow's) concrete reinforced with rebar. 4EVERCRETE for Rebar is specially formulated to stop or virtually prevent the corrosion of imbedded steel within concrete.
|
Additional Info on 4EVERCRETE: