The FiberTech System is ECI's flagship product line. Our environmentally-advanced specialty coatings are extremely low- or 0-VOC; can be applied with a sprayer, brush or rollers; and are engineered specifically for the encasement of hazardous materials, such as lead-based paint, asbestos and mold cleaned surfaces. The FiberTech System also has the capability to provide waterproofing, rust-inhibiting, and mold-resistant properties depending on what the job requires. Learn More
FiberTech F-50 Penetrating Stabilizer Primer is a water-based primer with more than ten times the adhesion of other encasement primers. It has been specially engineered to penetrate, stabilize and permanently lock down a substrate and serves as the primer of the FiberTech System.
|
FiberTech F-51 Sealer Coat is a water-based topcoat for the FiberTech System, it was designed to form a composite system when applied over the F-50 primer . It has excellent adhesion and waterproofing properties and can stand up against ponding water on roof substrates including bituminous surfaces.
|
FiberTech F-50MS Penetrating Stabilizer Rust-Inhibiting Multi-Surface Primer is a water-based primer, originally created to be applied to metal roofing and has now been used in many applications where corrosion is or may be of concern.
|
FiberTech F-51MR Mold Resistant Sealer Coat is the mold-resistant version of the F-51 top coat. It has been specially formulated to inhibit the growth of mold and can be used in areas subjected to ponding water.
|
FiberTech F-50MR Penetrating Stabilizer Mold-Resistant Primer is the mold-resistant version of the F-50 primer. It has been specially formulated to inhibit the growth of mold and should be used as the primer on mold-cleaned surfaces.
|
FiberTech F-60 Mold Resistant High Gloss Sealer Coat is a water-based coating, specially designed to waterproof and protect masonry and brick. It is used as a high gloss finish coating and is applied over the FiberTech F-51 Sealer Coat to form a waterproof jacket on all metal, wood, masonry and brick surfaces. It has been specially formulated to inhibit the growth of mold and can be used in areas subjected to ponding water.
|
FiberTech F-45 Fiber-Trap is a water-based penetrating sealer for use on asbestos and asbestos type fibrous substrates. Fiber-Trap not only surrounds, but penetrates the individual fibers, binding them together and helps bind the asbestos to the substrate.
|
FiberTech F-52 Insulating Ceramic Sealer Coat is a ceramic filled water-based coating, specially designed to waterproof and protect roof surfaces, masonry and brick on the exterior and all surfaces on the interior of buildings. F-52 acts as a thermal barrier, which can reduce a building's utility costs by as much as 15-20%. It is also highly mold and mildew resistant.
|
Additional Info on FiberTech: